(
(
Do not adjust the rear handle to any other position
than specified five positions.
A
A
A
A
{Throttle lever does not work when the rear handle is unlocked)
Stop the engine before change the rear handle position.
Make sure the rear handle is locked before start the engine.
During operation, hold the rear handle with upright regardless the blade
direction.
Select the proper handle position to be always sure of a safe and secure
operating position.
STARTING AND STOPPING PROCEDURE
Before Starting The Engine:
Fill the fuel tank as instructed in the BEFORE OPERATION section
of this manual. Rest the Hedge Trimmer on the ground. Make sure that the cutting blades are clear
of branches, shrubs, debris, etc. Keep all bystanders, children and animals away from the working
area.
STARTING THE ENGINE
The carburetors on MARUYAMA engines contain a choke
system.
1 . Push and release the fuel primer bulb located on the
bottom of the carburetor until air bubble free fuel is seen
flowing through the clear fuel return hose back to the
fuel tank.
2. Move the choke lever to the closed position "/ ".
When the engine is warm, move the choke lever to the
open position " •.
3. Set the engine stop switch to the ''ON" position.
4. Lock the throttle trigger in the fast-idle start position.
HT2320D,HT2320DL
HT2320D-R
FAST-IDLE LOCK
FAST-IDLE
POSITION
IDLE POSITION
FAST-IDLE LOCK
PRIMER BULB
PUMP
V
FUEL-RETURN LINE
ON
HT2320, HT2320L
FAST-IDLE LOCK
IDLE POSITION
FAST-IDLE POSITION
A
Before starting the engine, place the machine on the ground and make sure the blade is
free from branches and stones.
-14-
