Power Hedge Trimmer safety
1. Shut off the engine and wait untt the cutting blades have completely stopped moving before
checking, maintaining or working on the Hedge Trimmer.
2. Inspect the Hedge Trimmer before each use. Replace damaged parts. Check for fuel leaks.
Make sure all fasteners are in place and tightened securely.
3. Inspect the Hedge Trimmer cutting blades and guide. Replace any parts that are cracked,
chipped, or damaged before using the Hedge Trimmer.
4. Never use replacement parts that are not approved by Maruyama U.S., Inc.
5 Maintain the Hedge Trimmer in accordance with the recommended maintenance intervals and
procedures in the maintenance section, pages 16 to 19.
6. If running problems or excessive vibration occur, stop immediately and inspect the unit for the
cause. II the cause cannot be determined or is beyond your ability to correct, return the Hedge
Trimmer to your servicing dealer for repair.
7. Never use the Hedge Trimmer if handles are damaged or handle fasteners are loose.
Always make sure all fasteners (nuts and bolts) are installed and properly tightened.
8. Never use a machine that has been modified so that it no longer corresponds with the original
design.
9. Do not attempt to repair the Hedge Trimmer unless you are qualified to do so.
10. When transporting or storing the Hedge Trimmer always install the blade shield.
Fuel safety
1. Gasoline is highly flammable and must be handled and stored carefully .. Use a container
approved for storing gasoline and/or fuel/oil mixture.
2. Mix and pour fuel outdoors and where there are no sparks or
flames.
3. Do not smoke near fuel or the Hedge Trimmer or while using the
Hedge Trimmer.
4. Do not overfill the fuel tank. Stop filJing 114 • 1/2 inch (6mm-13mm)
from the top of the tank.
5. Wipe up any spilled fuel before starting the engine.
=----
WIPE UP />NY FUEL SPILLAGE
