38
(14) Inspecting the Agitator
[1] Press the spray pump switch to actuate the spray
pump and the agitator, and inspect if the agitator
blades are rotating smoothly.
[2] Remove the screw mounting the flexible shaft to
remove the shaft.
[3] Pull out the inner wire from the flexible shaft and
inspect for any damage. If it is damaged, replace it
with a new one.
[4] Apply grease to the entire surface of the inner wire
and assemble it back to the original position.
(15) Inspecting the Rear Axle Stopper Bolts
If the machine body tilts significantly when the driver
gets on board or gets off, request to have the rear axle
stopper bolts adjusted at the sales dealer where the
machine was purchased.
(16) Inspecting the Floor
Inspect the floor for cracks, fissures or any other
abnormality. If any abnormality is found, submit a
request for replacement to the sales dealer where the
machine was purchased.
Mounting
screw-on
Flexible shaft
Inner wire
Stopper bolts
Floor
