background image

1.

SAFETY RULES

WARNING

DISCONNECT FROM SUPPLY BEFORE OPENING

TESTER

This tester has been designed with your safety in mind.

However, no design can completely protect against incorrect

use. Electrical circuits can be dangerous if lack of caution and/

or poor safety practices are used.

READ THE MANUAL

Read this Instruction Manual carefully and completely.

Voltages and currents within the capability of this instrument

can be hazardous. Follow the instructions in this manual for

every test. Read and understand the general instructions before

attempting to use this tester. Do not exceed the limits of this

tester.

1.

SAFETY RULES

WARNING

DISCONNECT FROM SUPPLY BEFORE OPENING

TESTER

This tester has been designed with your safety in mind.

However, no design can completely protect against incorrect

use. Electrical circuits can be dangerous if lack of caution and/

or poor safety practices are used.

READ THE MANUAL

Read this Instruction Manual carefully and completely.

Voltages and currents within the capability of this instrument

can be hazardous. Follow the instructions in this manual for

every test. Read and understand the general instructions before

attempting to use this tester. Do not exceed the limits of this

tester.

-2-

-15-

-2-

-15-

Содержание LP2000











Отзывы: