7
CONTENTS
1
Introduction
1.1
Description
1.2
Unpacking & Inspection
2
Specifications
3
Operation
3.1
Precautions
3.2
Description of Display
3.3
Using the E-ZeTest EZ2500
3.3.1
Connection
3.3.2
Self-Test
3.3.3
Phase Neutral and Earth Loop Impedance test
3.3.4
Wiring and Voltage Check
3.3.5
Repeat Measurements
3.3.6
RCD's in the Circuit Under Test
3.3.7
Possible Measurement Errors of Phase Neutral and
Earth Loop Impedance
3.4
Table of messages
4
Maintenance
4.1
Cleaning
4.2
Repair & Service
4.3
Storage Conditions
5
Warranty
4. MAINTENANCE
4.1 Cleaning
The E-ZeTest EZ2500 may be cleaned using a soft damp cloth. Do not use
abrasives, solvents, or detergents, which can be conductive. Allow to dry
completely before using.
4.2 Repair & Service
There are no user serviceable parts in this unit. Return to Martindale Electric
Company Ltd if faulty. Our service department will quote promptly to repair any
fault that occurs outside the guarantee period.
Before the unit is returned, please ensure that you have checked the unit and
associated leads thoroughly for flat batteries (check & replace), blown fuses (check
& replace) and other poor connections.
4.3 Storage Conditions
The E-ZeTest EZ2500 should be kept in warm dry conditions away from direct
sources of heat or sunlight, and in such a manner as to preserve the working life of
the unit. It is strongly advised that the unit is not kept in a tool box where other
tools may damage it.
5. WARRANTY
The E-ZeTest EZ2500 is guaranteed against faults in manufacture and materials
for 24 months from date of invoice and will be rectified by us free of charge,
provided the unit has not been tampered with and is returned to us with its housing
unopened. Damage due to dropping, abuse or misuse are not covered by this
guarantee. Batteries and fuses are not covered by this guarantee.
Nothing in these instructions reduces your statutory rights.
