SAFETY INFORMATION: Always read before proceeding.
WARNING
These instructions contain both information and warnings that are necessary
for the safe operation and maintenance of the E-ZeTest EZ2500. It is
recommended that you read the instructions carefully and ensure that the
contents are fully understood. Failure to understand and to comply with the
warnings and instructions can result in serious injury, damage or even death.
In order to avoid the danger of electrical shock, it is important that proper
safety measures are taken when working with voltages exceeding 30 V AC
rms, 42 V AC peak or 60 V DC.
The E-ZeTest EZ2500 must only be used under the conditions and for the
purposes for which it has been constructed. Particular attention should be
paid to these Warnings, the Precautions, the Technical Specifications and
the use of the E-ZeTest EZ2500 in dry surroundings.
Always check the E-ZeTest EZ2500 is in good working order before use and
that there are no signs of damage to the unit. Do not use if damaged.
Always inspect your meter, test leads and accessories for any sign of
damage before use. If any abnormal conditions exist (e.g: broken test leads,
cracked case, display not reading, etc.), do not attempt to use it. Do not
expose it to direct sunlight, excessive temperature or moisture.
Keep these instructions for future reference. Updated instructions and
product information are available at: www.martindale-electric.co.uk
SYMBOLS:
Equipment complies with relevant EU Directives
AC (Alternating Current)
Ground
Direct Current
Equipment protected by Double Insulation (Class II)
Caution - refer to accompanying documents
Caution - risk of electric shock
