Martin QC 1 HD MT, Руководство по установке

Страница: 22 / 47

© Martin Engineering GmbH 20 M3814UK-03/16
Installation
5.2.4 Centre the mainframe below the conveyor belt
Measure on both sides the distance (A) to (B) between the edge of
the cleaning elements and the conveyor belt edge.
Slide the cleaner until distance A is equal to distance B. The convey-
or belt should protrude about 50 to 100 mm on both the left and the
right sides. The cleaner blade must be positioned in the centre be-
low the conveyor belt.
5.2.5 Aligning the mainframe parallel to the conveyor belt
Measure the distance on both sides between the cleaner blade and
the head pulley. To do this, place the cleaner blade against the con-
veyor belt. The measurements on both sides must be equal.
Fig. 5: Centring the mainframe (example)
Fig. 6: Aligning the mainframe parallel to the head pulley (example)
A = B
A
B
B
A = B
B
A
A
A = B