manualshive.com logo in svg

Martin MAC III AirFX, Руководство пользователя

Поделиться
Скачать
Martin MAC III AirFX Скачать руководство пользователя страница 61

Disposing of this product

Martin™ products are supplied in compliance with Directive 2002/96/EC of the European Parliament and of the 
Council of the European Union on WEEE (Waste Electrical and Electronic Equipment), as amended by Directive 
2003/108/EC, where applicable.

Help preserve the environment! Ensure that this product is recycled at the end of its life. Your supplier can give 
details of local arrangements for the disposal of Martin products.

This product contains two batteries. Ensure that they are disposed of responsibly by an authorized recycling or 
waste disposal center at the end of their life. Where applicable, Martin participates in schemes whose aim is to 
ensure that local recycling and/or waste disposal centers accept batteries from Martin products.

Intellectual Property Rights

MAC III™ products are covered by one or more of these patents: CN100567808; CN101430070; CN101430073; CN101430075; 
CN101430080; CN101435554; CZ17567; EP1234197; EP1747399; EP2112431; EP2113714; EP2117284; US6241366; 
US6601973; US6687063; US6971770; US7222997; US7498756; US7559676; US7654693; US7703948; US7789525; 
US7789533; US7789543; US7905630; US7942535; US7954981; US7990673;

and/or one or more of these patent applications: CN101430074; CN101430076; CN102155731; CN102460001; CN102483218; 
CN102483219; DKPA201270221; EP2058586; EP2091302; EP2103864; EP2133626; EP2136136; EP2146141; EP2326150; 
EP2443381; EP2475931; EP2475932; US20120218767; US13/378,184; US13/394,939;

and/or one or more of these designs: CN300993074; CN301014852; CN301022860; CN301063459; EU000918891; USD612532; 
USD614344; USD618377; USD638573;

and/or one or more other intellectual property rights, including one or more intellectual property rights listed on www.martin.com/ipr

Photobiological Safety Warning

The label shown on the left is displayed on this product. If it becomes difficult or 
impossible to read, it must be replaced using the illustration on the left to 
reproduce a new label.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

Canadian Interference-Causing Equipment Regulations - 

Règlement sur le Matériel Brouilleur du Canada

This Class A digital apparatus meets all requirements of the Canadian 
Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du 
Règlement sur le Matériel Brouilleur du Canada.

Содержание MAC III AirFX

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды