Martin MAC III AirFX, Руководство пользователя

Страница: 51 / 64

Control panel menus 51
FIXTURE
INFORMATION
FIRMWARE
VERSION
Vxx.xx.xx
Fixture software version
POWER ON TIME
TOTAL POWER ON
Display hours fixture has been powered on
since manufacture (not user-resettable)
RESETTABLE POWER ON
Display hours fixture has been powered on
since last counter reset (user-resettable)
CLEAR RESETTABLE POWER ON
Reset RESETTABLE POWER ON counter
to zero.
LAMP ON TIME
TOTAL LAMP ON
Display hours of lamp use since
manufacture
(not user-resettable)
RESETTABLE LAMP ON
Display hours of lamp use since last
counter reset (user-resettable)
CLEAR RESETTABLE LAMP ON
Reset RESETTABLE LAMP ON counter
to zero.
LAMP STRIKES
TOTAL LAMP STRIKES
Display number of times lamp has been
struck since manufacture (not
user-resettable)
RESETTABLE LAMP STRIKES
Display number of times lamp has been
struck since last counter reset
(user-resettable)
CLEAR RESETTABLE LAMP STRIKES
Reset RESETTABLE LAMP STRIKES
counter to zero.
AIR FILTERS
RESETTABLE AIR FILTER
Display hours fixture has been powered on
since timer was last cleared.
SET TIME ALERT
Set alert timer from 0 - 750 hours.
CLEAR RESETTABLE AIR FILTER
Resets AIR FILTER timer to zero.
MAC ID xx.xx.xx.xx.xx.xx
Fixture’s MAC address
SERIAL NUMBER (xx)xxxxxxxxxxxx
Fixture’s serial number
RDM UID 0x4D50.xxxxxxxx
Fixture’s unique RDM ID
FAN SPEED
Displays speed in RPM of all cooling fans
TEMPERATURE
Displays temperature in °C of all PCBs and
of ballast capacitor
POWER UNIT
Displays voltage at mains power input,
voltage, current and wattage at lamp
terminals, lamp status, igniter status and
lamp intensity.
EVENT LOG VIEWER
Views fixture event log
DMX LIVE
RATE
DMX transmission speed in packets per
second
QUALITY
Percent of packets received
START CODE
Value of the DMX start code
STROBE/SHUTTER → FIXTURE ADJUSTMENTS
DMX value (0 - 255) received on each
channel
Values for fine control channels can only
be viewed if available in the DMX mode
the fixture is set to
TEST SEQUENCE
ACTION Start / Stop / Pause
Run test sequence of all functions
REPEAT On / Off
Enable auto-repeat of test sequence
STATUS
→
DURATION
Scene status information for test sequence
MANUAL
CONTROL
RESET ACTION
Click jog wheel to reset fixture
LAMP ON/OFF ACTION
Manually strike/douse lamp
STROBE/SHUTTER
→
TILT
Set each effect manually.
Menu level 1 Menu level 2 Menu level 3 Menu level 4 Notes (Default settings in bold print)
Table 3: Control menus