Martin MAC III AirFX, Руководство пользователя

Страница: 46 / 64

46 MAC III AirFX user manual
21
0 - 9
10 - 14
15 - 19
20 - 24
25 - 29
30 - 34
35 - 39
40 - 44
45 - 49
50 - 54
55 - 59
60 - 64
65 - 69
70 - 74
75 - 79
80 - 84
85 - 89
90 - 94
95 - 99
100 - 139
140 - 144
145 - 149
150 - 154
155 - 159
160 - 164
165 - 169
170 - 174
175 - 194
195 - 199
200 - 204
205 - 209
210 - 214
215 - 219
220 - 234
235 - 239
240 - 244
245 - 255
0 - 1
2 - 3
4 - 5
6 - 7
8 - 9
10 - 11
12 - 13
14 - 15
16 - 17
18 - 19
20 - 21
22 - 23
24 - 25
26 - 27
28 - 29
30 - 31
32 - 33
34 - 35
36 - 37
38 - 53
54 - 55
56 - 57
58 - 59
60 - 61
62 - 63
64 - 65
66 - 67
68 - 76
76 - 78
78 - 80
80 - 82
82 - 84
84 - 86
86 - 91
92 - 93
94 - 95
96 - 100
Fixture control/settings
No function
Reset entire fixture
(1)
Reset dimmer and shutter only
(1)
Reset CMYC and color wheel only
(1)
Reset FX module only
(1)
Reset zoom and focus only
(1)
Reset pan and tilt only
(1)
No function
Lamp on
Lamp off
(1, 2)
No function (Note: this value is used for managing pan/tilt limits and storing
calibration values on channel 22)
Dimmer curve = Optically linear
(menu override, setting unaffected by power off/on)(2)
Dimmer curve = Square law
(menu override, factory default setting, setting unaffected by power
off/on)(2)
Dimmer curve = Inverse square law
(menu override, setting unaffected by power off/on)(2)
Dimmer curve = S-curve
(menu override, setting unaffected by power off/on)(2)
No function
Pan & tilt speed = Normal (menu override - Setting returns to MENU setting
after power on/off)
(2)
Pan & tilt speed = Fast (menu override - Setting returns to MENU setting
after power on/off)
(2)
Pan & tilt speed = Slow (menu override - Setting returns to MENU setting
after power on/off)
(2)
No function
Parameter shortcuts = ON
(menu override, setting stays at factory default ON at power off/on)
(2)
Parameter shortcuts = OFF
(menu override, setting returns to factory default ON at power off/on)
(2)
No function
Disable zoom/focus linking
(2)
Enable zoom/focus linking, near distance
(2)
Enable zoom/focus linking, medium distance (factory default setting)
(2)
Enable zoom/focus linking, far distance
(2)
No function
Ballast output set to 100%
Ballast output reduced, set to 90%
Ballast output reduced, set to 80%
Ballast output reduced, set to 70%
Ballast output reduced, set to 60%
No function
Illuminate display on fixture
(2)
Turn off display on fixture
No function
(1)
If DMX Reset or DMX Lamp Off are disabled in the control menus, a full
or partial reset command or a lamp off command can be executed only if:
• Slot 1 is selected on the color wheel (DMX value 20 on channel 8)
(2)
Value must be held for 5 seconds to activate
Snap 0
DMX
channel
DMX
value
Percent Function
Fade
type
Default
value
Table 2: MAC III AirFX DMX Protocol