Martin MAC III AirFX, Руководство пользователя

Страница: 42 / 64

42 MAC III AirFX user manual
Gobo orientation
The orientations shown in Figure 24 are correct in most cases, but consult your Martin dealer or gobo
supplier if you are in any doubt about the orientation of a specific gobo type. To minimize the risk of heat
damage, priority must be given to installing gobos with their more reflective sides facing the lamp.
Removing modules
The MAC III AirFX is modular in design. A full procedure for removing and servicing effect modules is
included in the Martin™ service package available for the MAC III AirFX.
Coated Glass Gobos
The heavy matted aluminum coated borosilicate gobos in the MAC III AirFX are
factory-installed with the more reflective sides facing towards the lamp. Replacement
gobos must also be installed with more reflective sides facing the lamp.
More reflective side towards lamp
To minimize the risk of gobo overheating
and damage, turn the more reflective side of
a coated gobo towards the lamp.
Less reflective side away from lamp
The less reflective side of a coated gobo will
absorb less heat if it faces away from the
lamp.
Textured Glass Gobos
Textured side towards lamp Smooth side away from lamp
Textured glass gobos in the MAC III AirFX sit most squarely in the gobo wheel with the
textured side towards the lamp. If in doubt, consult your Martin dealer or gobo supplier.
Image / text Gobos
True image towards lamp Reversed image away from lamp
Figure 24. Correct gobo orientation
abc
abc