Martin Exterior Projection 500, Руководство пользователя

Страница: 7 / 60

Exterior Projection 500 User Manual 7
Protection from eye injury
Do not stare directly into the light output. Ensure that persons are not looking
directly into the lamp when the fixture lights up suddenly. This can happen when
power is applied, when the fixture receives a DMX signal, or when certain control
menu items are selected.
Do not look at the light output with magnifiers, telescopes, binoculars or similar
optical instruments that may concentrate the light output.
Wear protective glasses and other PPE (personal protective equipment) when
working on or near the fixture.
The risk group distances given below apply to the light output from one fixture
only. If fixtures can be operated in combination, light intensity can increase and
you should consult a lighting professional for safety recommendations.
The Exterior Projection 500 falls into the following risk groups according to EN
62471 at the distances indicated:
At a distance of less than 5.2m (17 ft.) from the fixture, the light output can
potentially cause eye or skin injury before an exposed person’s natural aversion
responses (blink reflex and reaction to skin discomfort) can protect them. At
distances greater than 5.2m (17 ft.), potential eye and skin injury hazards from the
light output are normally prevented by natural aversion reflexes.
Position the Exterior Projection 500 so that persons cannot be exposed to the
fixture’s light output at less than 5.2m (17 ft.) from the fixture and so that
prolonged staring into the light output at less than 7 m (23 ft.) from the fixture is
not expected.
Protection from injury
Fasten the fixture securely to a fixed surface or structure when in use. The fixture
is not portable when installed.
Ensure that any supporting structure and/or hardware used can hold at least 10
times the weight of all the devices they support.
Check that all external covers and installation hardware are securely fastened.
Do not operate the fixture with missing or damaged covers, shields or any optical
component.
Block access below the work area and work from a stable platform whenever
installing, servicing or moving the fixture.
In the event of an operating problem, stop using the fixture immediately and
disconnect it from power. Do not attempt to use a fixture that is obviously
damaged.
Do not modify the fixture or install other than genuine Martin parts.