Martin Exterior Projection 500, Руководство пользователя

Страница: 20 / 60

20 Exterior Projection 500 User Manual
Manual test / manual single scene display
The manual test commands let you display a single scene (i.e. a single combination of effects)
manually, either for test purposes or to control the fixture without a DMX controller. To set up the
scene:
1. Select MANUAL TEST and press ENTER.
2. Use UP and DOWN to scroll through the fixture’s effect controls (STROBE, INTENSITY,
COLOR, GOBO SELECTION, etc.). Press ENTER to select an effect to adjust.
3. Use UP and DOWN to select a value for the effect, and press ENTER to confirm your
selection.
4. Repeat for each effect you want to control.
5. Press MENU to exit.
Any scene that you set in the MANUAL TEST menu is retained in memory when fixture power is
cycled off and on. The MANUAL TEST menu therefore lets you set up a permanent single-scene
display without DMX control.
Resetting effects
To reset an effect, returning it to its default setting:
1. Select RESET FUNCTIONS and press ENTER.
2. Select ALL or one of the effects.
3. Press ENTER to reset.
4. Press MENU to exit.
Returning to factory defaults
To return the fixture to its factory default settings, erasing any settings, standalone scenes, etc.
stored in the fixture’s memory:
1. Select FACTORY DEFAULT and press ENTER.
2. Select YES to return to factory defaults or NO to exit.
3. Press ENTER to confirm.
4. Give the fixture time to return to the factory default settings.
Display setting
The DISPLAY SETTING menu provides options to invert, dim, and turn off the control panel
display.
Display inverse
For easier reading when the fixture is mounted upside down, flip the display as follows:
1. Select DISPLAY INVERSE and press ENTER.
2. Select YES to invert the display or NO for normal reading.
3. Press ENTER to confirm.
Display auto turn off
Important! We strongly recommend that you set the display to turn off automatically after 1 minute
in order to maximize the lifetime of the display. AUTO OFF

YES is the factory default setting.
The display can be set to stay on or to turn off 1 minute after the last key press. To set display
behavior:
1. Select DISPLAY AUTO OFF and press ENTER.