Martin Exterior Projection 500, Руководство пользователя

Страница: 35 / 60

Exterior Projection 500 User Manual 35
The rotating gobos in the Exterior Projection 500 are installed in goboholders that clip into the
rotating gobo wheel.
To replace a gobo:
1. Remove the top cover as described under ’Removing and reinstalling the top cover’ on page
32.
2. See illustration below. Position the alignment mark (arrowed) in the goboholder at a reference
point such as the midpoint between the end of the motor mounting plate and multi-connector
shown below. Always remove and reinstall goboholders with alignment marks in the same
position so that you keep gobos in the same orientation.
3. See illustration below. Pull the goboholder forwards, away from the wheel, then lift it up out of
the wheel.