Martin Exterior 400, Руководство пользователя

Страница: 24 / 44

24
Exterior 400 Image Projector user manual
Raw and calibrated modes
The
Output Mode
setting lets you set the fixture to raw or calibrated output:
•
Raw
– Maximum LED light output is available but intensity may differ very slightly between fixtures
•
Calibrated
– LED light output is limited very slightly to ensure that intensity is the same in different
fixtures.
Setting up via RDM
The Exterior 400 Image Projector is compatible with RDM (Remote Device Management). Using an
RDM-compliant DMX controller such as the Martin M-PC™ Windows application, you can communicate
with all the fixtures on a data link via RDM without needing to connect to each fixture individually. You can
set the DMX addresses of all the fixtures on the link, carry out basic configuration and retrieve basic fixture
data.
To use Martin M-PC, connect a PC running this application to the data link via the Martin USB Duo™
USB/DMX interface box. Before you can communicate with fixtures, you will need to send a
Scan
command
from M-PC to detect the devices on the data link.