Press the retarder (sheet separator) release button. This will release the pressure against the Feed
Wheel and allow the technician to turn the Feed Wheel in the direction of paper feed. While the but-
ton is depressed, the Feed Wheel should turn freely.
If the retarder adjustment is incorrect, insert
the provided 9/64” hex wrench into the adjust-
ment hole. Turn the wrench clockwise to
loosen, counterclockwise to tighten.
(7)
Retarder pressure release button. When you press
this button and turn the Feed Wheel, it should turn
freely. When you release this button, you should
feel the rubbing of the retarder against the Feed
Wheel. This should be a slight drag.
