7.
Place the fanned paper onto the Feed Table
Assembly (see Figure #6) with the top sheet
positioned where the Feed Wheel and Retarder
Assembly meet.
8.
Hold the On/Off/Momentary Switch on the
momentary position and feed one sheet through
the machine until it falls onto the Exit Tray.
Position the Stack Wheel Assembly so that the
leading edge of a folded sheet touches the
wheels when the trailing edge just falls onto the
Conveyor Table.
9.
Turn on the folder and run several sheets. Stop
the folder and inspect the folded sheets for
accuracy.
10.
Make 1st Fold corrections with the 1st Fold
Table Paper Stop. Make 2nd Fold corrections with the 2nd Fold Table Paper Stop. (See Figures #7-10 for
first and second fold descriptions.)
11.
After corrections are made, turn on the folder and complete the folding job
.
(6)
Fig. 6–Fan Paper–Feed Table
Paper Guide
Feed Table
Fanned Paper
Feed Wheel
Retarder Assy
Retarder
Pressure
Nut
Fig.7–Tri–Fold
Leading Edge
2nd Fold
1st Fold
Fig.8–Z–Fold
Leading Edge
2nd Fold
1st Fold
Fig. 9–Double Parallel
Leading Edge
Fig.10–Single Fold
Leading Edge
1st Fold
1st Fold
2nd Fold