12
5. WIRING:
Identify the two harnesses provided for the control box wiring:
•
Planters harness (JCA86
-
000012 ) with 9 connectors.
•
Power harness (JCA86
-
000011) with one connector and two ring wire
-
ends
Start with the planters harness.
•
Locate the connector labeled
“
CONVERTER BOX
”
and connect it to the provided Signal con-
verter box (JCA00
-
015001) shown in the picture.
•
Locate the connectors labeled
“
ORL
-
A
”
and
“
ORL
-
B
”
and connect them to the provided ORI-
OLE controller box (JCA00
-
009001) shown in the picture.
•
Locate the connector labeled
“
PRES
-
REG BANK
-
1
”
and connect it to the bank
-
1 pressure
regulator in the box. The bank
-
1 pressure regulator is the one farther from the air inlet/
outlets and has a tee connection fitting. Secure the connector to the valve using the center
bolt provided in the small plastic bag attached to the planter harness .
Bank
-
1 pressure regulator
connector
Bank
-
2 pressure regulator
connector
Tee connection fitting
