11
Meter Settings
Default Settings
The
Grainmaster i2
-
S
is supplied ready
-
to
-
use with ATC on, no bias
adjustments and temperature in °C.
To alter default settings
Bias is adjusted as described on Page 9. Temperature units can be changed to
suit personal preference and ATC can be switched off in Setup Mode, as below:
To enter Setup Mode:
With the meter switched off, press and hold
and
.
Keep holding
and
until
‘configuration’
appears and then release both buttons at the same time.
The meter version information will appear on screen before entering the setup
menu.
The
button (Skip) is used to navigate through the setup menu.
The
Λ
and
V
buttons are used to change the selected parameter.
The button is used to save the selected parameter.
Remember to press save
each time you make a change.
To exit the setup menu, keep pressing
(Skip) until you return to the standby
screen indicated by
Note:
ATC should always be on during normal meter use.
Setup Menu Screenflow
_ _ _
Bluetooth:
To turn on Bluetooth, turn on your meter, press and hold
Λ
and then press
.
will appear on the screen.
To turn it off do the same with
the
V
button.
Note: Auto
-
off is disabled whilst Bluetooth is on.
