manualshive.com logo in svg

Martin Audio Wavefront W8CT, Инструкция по применению

Поделиться
Скачать
Martin Audio Wavefront W8CT Скачать руководство пользователя страница 3

Introduction

Wavefront Compact Series Overview

Thank you for purchasing a Martin Audio Wavefront Compact Series system.

Wavefront Compact Series products make up a coherent "toolkit" of compact, live
sound enclosures covering a huge range of professional sound projects from high
quality club installations to major touring and festival systems.

Unpacking

Each Martin Audio loudspeaker is built to the highest standard and thoroughly
inspected before it leaves the factory. After unpacking the system, examine it
carefully for any signs of transit damage and inform your dealer if any such damage
is found. It is suggested that you retain the original packaging so that the system can
be repacked at a future date if necessary.

Please note that Martin Audio and its distributors cannot accept any responsibility for
damage to any returned product through the use of non-approved packaging.

Standards

Martin Audio Wavefront Compact Series products conform to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC and the
requirements of the Low Voltage Directive 73/23/EEC, amended by 93/68/EEC.

EMC Standards Applied:
Emission EN55103-1:1996
Immunity EN55103-2:1996
Electrical Safety EN60065:1993

About this Applications Guide

This Applications Guide is based on Wavefront Compact field experience and general
acoustical principles. We have provided information on the most popular system
configurations and have included simple equations for those wishing to calculate the
broadband coverage of their own cluster designs.

Going Further

Martin Audio Ltd manufactures a wide range of loudspeakers, system controllers and
power amplifier. Visit our web-site at 

www.martin-audio.com

 for the latest product

and applications news.

All material © 2007. Martin Audio Ltd. Subject to change without notice.

Содержание Wavefront W8CT
























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды