Martin Audio Wavefront Precision Series Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 45

background image

Copyright © 2019 Martin Audio Ltd.

29

WPS USER GUIDE V1.0

WPS USER GUIDE

Rigging WPS and WPSGRIDt

WPS cabinets conveniently truck fully enclosed in a custom designed transport cart, preconfigured in blocks of four, and are rigged straight
out of the transport cart to provide an extremely fast and streamlined process.

The cabinets travel in the transport cart at maximum curvature. The transport cart is manufactured around a welded aluminium frame with
timber inserts coated in textured paint. It has a shaped timber base with nylon skids to support the cabinets which are attached to the base
with rigging pins front and back. There are rubber pads on the underside of the top to hold the four cabinets securely when in transit. After
removing the top of the transport cart and the supporting poles, the WPS array is easily accessible for rigging. Rigging pins are inserted at
the holes required for the cabinet angles as predicted by your DISPLAY project. The array is then lifted so that the angles open until the
rear rigging reaches the stops limited by the rigging pins at the preset angles. A second rigging pin is put in place on each cabinet to lock
the angles so the array can’t collapse back down.

Once the array is flown out of the transport cart, the poles can be placed in the bottom section and the top latched on to the base keeping
it compact for storage.

IMPORTANT SAFETY NOTICE

The transport cart must not be moved side-on as there is a danger it could tip, particularly on loading ramps. The cart must only be moved
as shown below.

The following example illustrates the procedure for rigging an array of eight WPS cabinets with the WPSGRIDt touring flying frame.

Cart Removal

Wheel a WPS transport cart complete with four cabinets into place and position it under the chosen rigging point.

«
...
27
28
29
30
31
...
»

Содержание Wavefront Precision Series














































Отзывы:

Нет отзывов

Похожие инструкции для Wavefront Precision Series

Бренд: KAWNEER Страницы: 4

Бренд: Hanowa Страницы: 6

Бренд: Lampert Страницы: 18

Бренд: Samsung Страницы: 2

Бренд: Dali Страницы: 8

Бренд: Cambridge Audio Страницы: 4

PlayWorks PS2000 Digital

Бренд: Cambridge SoundWorks Страницы: 22

MegaWorks THX 2.1 250D

Бренд: Cambridge SoundWorks Страницы: 13

Center Channel II

Бренд: Cambridge SoundWorks Страницы: 7

Бренд: Cambridge SoundWorks Страницы: 14

Бренд: Cambridge Audio Страницы: 4

Бренд: d&b audiotechnik Страницы: 11

Home Theater System

Бренд: M&S Systems Страницы: 8

Бренд: dB Technologies Страницы: 4

Бренд: dB Technologies Страницы: 89

Бренд: dbx Страницы: 51

Бренд: dBTechnologies Страницы: 4

Бренд: ICMA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды