Martha MTS-04DD Скачать руководство пользователя страница 2

2

Battery Tool Use and Care

1.  Recharge only with the charger specified by the 

manufacturer – A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

2.  Charge internal battery at ambient temperatures 

between 50ºF – 104ºF (10ºC – 40ºC).

3.  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help – Liquid ejected from the 

battery may cause irritation or burns.

Service

1.  If your power tool requires service, contact an 

authorized Snow Joe

®

 + Sun Joe

®

 dealer or call the 

Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563). Only identical 

replacement parts should be utilized for repairs. This will 

ensure that the safety of the power tool is maintained.

2.  If the battery charger cable is damaged, it must be 

immediately replaced to avoid a hazard. Contact 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) for assistance.

Safety Rules for Cordless 

Driver

1.  Make sure approved eye protection is being worn and 

properly adjusted and secured at all times the driver is 

being used. There is a possibility that small pieces of 

metal could shear off from over-tightened screws while 

using the tool.

2  Keep children at a safe distance while using the cordless 

driver. Distractions can cause inadvertent misuse resulting 

in possible injury to children or to the user.

3.  Use only driver bits that are designed for use with this 

driver. 

4.  Ensure the driver bits are firmly placed in the cylinder. 

Hold driver firmly in place before activating the trigger 

switch. 

5.  Do not plug the AC charger into an outlet where it can be 

exposed to water. Do not lay the driver in or near water 

while it is plugged into the AC charger. Failure to comply 

with this warning can result in severe electrical shock or 

severe burns to anyone who touches the charger or the 

driver.

6.  Use only the AC charger that came with the cordless 

driver. 

7.  Do not attempt to charge the driver if the power cord is 

broken or frayed. Always store the charger in a clean dry 

location until it is needed.

8.  Before use, carefully check the driver to determine 

whether it will operate and perform its intended function. 

9.  Check for misalignment or binding of moving parts, 

breakage of parts, and any other condition that may affect 

the driver's operation. Do not use the tool if you find 

damaged or missing parts.

10. Do not use the driver if f reverse selector switch 

does not work.

11. Never attempt any repairs youself. It is recommended that 

all repair or replacement for the tool shall be performed by 

a qualified service technician.

12. Do not carry the driver with your finger on the f 

reverse selector switch.

13. Do not abuse battery charger cord.
14. Never carry the charger by its cord or pull the cord to 

disconnect it from the socket.

15. Keep the cord away from heat, oil, and sharp edges.
16. Store driver in locations where temperatures will not 

exceed 120ºF (49ºC). This is important to prevent serious 

damage to the battery cells.

17. When not in use, store the driver and charger in a dry, 

locked or high place out of reach of children.

18. Keep handles and switches dry, clean and free from oil 

and grease.

Battery Safety Warnings

This manual contains important safety and operating 

instructions for your battery and charger.

1.  Before using the charger, thoroughly read all instructions 

and cautionary markings on the driver.

m

WARNING! 

If the driver housing is cracked or damaged, 

do not insert the charger plug into the power tool, or plug the 

charging adaptor into the mains outlet. There is a danger of 

electric shock or electrocution.

2.  This charger is ONLY intended to charge this rechargeable 

battery. Any other use poses a risk of fire, electric shock 

or electrocution.

3.  Do not place any object on top of the charger or place 

the charger on a soft surface that may result in excessive 

internal heat. Keep the charger away from any heat 

source.

4.  To reduce the risk of damaging the electric plug and 

cord, pull the plug, not the cord, when disconnecting the 

charger from the electric outlet.

5.  Make sure the battery charging cable is located in a safe 

place so that it will not be stepped on, tripped over or 

otherwise subjected to damage or stress.

6.  An extension cord should not be used unless absolutely 

necessary. Using an improper extension cord poses a risk 

of fire, electric shock or electrocution.

7.  Do not operate the charger if it has received a sharp 

blow or has become damaged in any way. Contact 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) before continuing 

use.

Содержание MTS-04DD













Отзывы: