Model MTS-04DD
Form No. SJ-MTS-04DD-880E-M
OPERATOR’S MANUAL
CORDLESS DRIVER
4-VOLT | RECHARGEABLE
© 2017 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
m
WARNING!
When using the driver basic safety
precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury. These include:
Work Area Safety
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Keep children, bystanders, and pets away – All
spectators, including pets, should be kept a safe distance
away from the work area.
3. Do not operate power tools in explosive atmospheres
– Such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the dust
or fumes.
Personal Safety
1. Stay alert – Watch what you are doing. Use common
sense. Do not operate the driver when you are tired, or
under the influence of alcohol or drugs.
2. Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid unintentional starting – Do not carry the driver
with your finger on the trigger. Make sure the switch is off
before connecting the driver to power source.
4. Do not overreach – Keep proper footing and balance at
all times. Proper footing and balance enable better control
of the cordless driver in unexpected situations.
5. Use personal protective equipment – Always wear eye
protection. Protective equipment such as dusk mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
6. Remove adjusting keys, or wrenches before turning
driver on – A wrench or a key that is left attached to a
rotating part of the tool may result in personal injury.
7. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. – Use of dust collection
can reduce dust-related hazards.
Tool Use and Care
1. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
2. Do not use driver if switch does not turn on or off –
The driver that cannot be controlled with the switch is
dangerous and must be repaired.
3. Disconnect the plug from the power source and/
or battery pack from the driver before making any
adjustments, changing accessories, or storing the
driver – Such preventive safety measures reduce risk of
starting the power tool accidentally.
4. Store idle driver out of reach of children or other
untrained persons – Drivers are dangerous in the hands
of untrained users.
5. Maintain cordless driver – Check for misalignment
or binding of moving parts, breakage of parts, and any
other condition that may affect the driver's operation. If
damaged, have the driver serviced before using. Many
accidents are caused by poorly maintained tools.
6. Use the driver, accessories and driver bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed – Use of the driver for operations different
from those intended could result in a hazardous situation.
7. Hold driver by insulated gripping surfaces when
perfoming an operation where the driver may contact
hidden wiring or its own cord – Contact with a "live wire"
will make exposed metal parts of the tool "live" and shock
the operator.
