manualshive.com logo in svg

Martel LC-110, Справочное руководство

Поделиться
Скачать
Martel LC-110 Скачать руководство пользователя страница 41

39

reliable communications between the LC-110H and PC. USB drivers 
are included on a CD with the cable when purchased from Martel.

6.12 Error Displays

There are two classes of errors which may occur during HART 
communications.  The first class contains errors that are reported by 
the loop device in its response.  The second class contains errors 
that are detected by the LC110H when receiving responses from the 
loop device.

Loop Device Errors

These errors are reported by the loop device in its response to the 

LC110H, per the HART protocol.
They are indicated by the text “Loop Device error:” at the top of the 

display.  This is followed by one of the following error messages.

1)  Invalid selection

The data value sent with the HART command is not allowed by this 
loop device.  The command was ignored by the loop device.  HART 

response code 2.

2)  Value too large

The data value sent with the HART command is greater than the 
range allowed by this loop device.  The command was ignored by 
the loop device.  HART response code 3.

3)  Value too small

The data value sent with the HART command is less than the range 
allowed by this loop device.  The command was ignored by the loop 

device.  HART response code 4.

4)  Message too short

The HART command received contains fewer characters than 

expected by this loop device.  The command was ignored by the 
loop device.  HART response code 5.

5)  Device specific error

The loop device has detected a device specific error.  The LC110H 
does not support the reporting of details on device specific errors.  
The command was ignored by the loop device.  HART response 
code 6.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание LC-110

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды