22
6.3.2 Tag Selection
The tag selection display lists all of the long tag names found during
polling. Tag names may span two lines if necessary to show all of
the text.
If the long tag name is not available, or it is blank, the short tag name
is used. If the short tag name is blank, the text “Poll address x” is
used.
If necessary, the display spans more than one screen. The lower left
corner contains the symbol
when additional screens follow the
present one, the symbol
when additional screens precede the
present one, and both when additional screens follow and precede
the present one. If there is only one screen, there is no symbol.
Long Tag 1
on two lines
Long Tag 2
Long Tag 3
Long Tag 4
on two lines
Rotate the knob to move the reverse video highlight to the desired
tag. Press the knob to select the highlighted tag and proceed to the
data acquisition display. Press MENU/EXIT to disconnect from HART
mode and return to the main display.
6.3.3 Data Acquisition
This display is shown while acquiring all of the configuration data
from the device. The string of dots is extended once per second to
show the operation is progressing. The
♥
symbol in the upper right
corner flashes to indicate a working connection.
Acquiring Data
♥
............
Tag name
The display shows the name of the tag being accessed.
Press MENU/EXIT to stop data acquisition, disconnect from HART
mode, and return to the main display.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
