12
On-Screen Menu (continued)
VIDEO CONFIGURATION SUBMENU (continued)
■
Pixel-to-Pixel Mode
Use this setting to enable Pixel-to-Pixel mode.
This mode bypasses the monitor’s internal scaling function and displays incoming images in their native resolution and
aspect ratio, with a one-to-one mapping:
•
For incoming formats smaller than the native resolution of the LCD panel (800 x 480), the image will be displayed
in the center of the screen using only the necessary LCD pixels. For example, NTSC images will occupy exactly
720 x 480 pixels. The surrounding pixels will be black.
•
For incoming formats exceeding 800 x 480 pixels, only the center 800 x 480 of the incoming image will displayed
occupying the whole screen, with the remainder of the picture cropped. For example, 1080i formats will both be
cropped to 800 x 480 and displayed full-screen.
Note: Pixel-to-Pixel mode disables aspect ratio control and H/V Delay.
■
H/V Delay
Use this setting to enable one of three delay modes (H & V Delay, V Delay, H Delay):
•
In H & V Delay mode, both horizontal sync and vertical sync are delayed, resulting in both horizontal and vertical
blanking periods being shown on the screen.
•
In V Delay mode, vertical sync is delayed so that the vertical blanking period is displayed on screen.
•
In H Delay mode, horizontal sync is delayed so that the horizontal blanking period is displayed on the screen.
■
Underscan
Use this setting to enable or disable Underscan mode:
•
When Underscan is OFF, the active portion of the video signal is displayed on the screen, with 0% overscan.
•
When Underscan is ON, the image size is slightly reduced. This allows the user to clearly view the edges of the
active video area.
■
NTSC Black Level
Set the NTSC Black Level according to the type of NTSC composite video input:
•
7.5 IRE: Use this setting for standard NTSC-M signals which use a 7.5 IRE setup (black level).
•
0 IRE: Use this setting for NTSC-J signals which have no setup, or a black level of 0 IRE.
Note: This setting is disabled for PAL composite input and all component/HDMI formats.
