Marshall Electronics V-LCD651STX-3GSDI, Руководство по эксплуатации

Страница: 7 / 24

7
Rear Monitor Features
Component and Composite Input and Output
The V-LCD651STX has HD component (YPbPr),
composite as well as active loop-through outputs for
each analog input. See page 8 for supported video
formats. The BNC inputs are internally terminated
with 75 ohms.
Module Slot
This area is intended for the Marshall Electronics
modules, which are factory installed.
.
Power Input
Connect 12VDC to the 4-Pin XLR power input
connector. Power can be supplied from the included
power supply, or from a variety of DC sources
supplying at least 1 Amp at 12 Volts.
IMPORTANT: If using a power source other than the
included power supply, be sure that the polarity of
the DC input is correct:
Pin 1: GND
Pin 2: N/C
Pin 3: N/C
Pin 4: +12VDC
Battery Adapter
The V-LCD651STX-HDI can be powered from a
variety of batteries. Several user-interchangeable
battery adapters are available. See page 18 for
available adapters.
¼-20 Mounting Hole
Use the ¼-20 mounting hole to attach the monitor to
a camera or variety of mounting devices
HDMI connector on
the V-LCD651STX-
HDMI model.
3G-SDI connector on
the V-LCD651STX-
3GSDI model.