Marshall Electronics V-LCD651STX-3GSDI, Руководство по эксплуатации

Страница: 11 / 24

11
Use the
▲ and ▼ buttons to select each individual bias or gain control. Press SELECT to begin adjusting the control. Use
the ▲ and ▼ buttons to increase or decrease the value.
Alternately, the image adjustment knobs (Brightness, Color, Tint, Contrast) can be used to easily adjust the bias and gain
settings as shown below. The knobs affect whichever row of controls (gain or bias) is currently selected.
■
Check Field
Use the check field modes for monitor calibration or to analyze individual color components of an image. In
Monochrome mode, all color is disabled and only a grayscale image is shown. In Blue, Green, and Red check field
modes, only the selected color will be shown.
Use the following procedure when calibrating the monitor to SMPTE color bars with the following procedure:
1. Allow the monitor to warm up for at least 5-10 minutes.
2.
Display SMPTE split-field color bars on the monitor using an external source.
3.
Enable
Monochrome mode
.
4.
Locate the pluge pattern (super black, black, and gray bars) at the lower-right corner of the screen. Adjust the
Brightness
knob until
there is no visible difference between the super black and black bars, but the gray bar is still visible.
5.
Adjust the
Contrast
knob until an even grayscale appears along the top bars.
6.
Disable
Monochrome mode
.
7.
Enable
Blue Check Field mode
and adjust the
Color
knob so that the outermost bars (white and blue) appear to match in brightness.
8.
Composite NTSC only: Adjust the
Tint
knob until the third bar from the left (cyan) and the third bar from the right (magenta) appear to
match in brightness.
9.
Disable
Blue Check Field mode
.
■
Aspect Ratio Settings
Use to switch between 4:3 and 16:9 aspect ratios.
As the V-LCD651STX-HDA monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are
automatically scaled to fit the screen:
•
In 4:3 mode, images are scaled to fill the entire 4:3 screen (1024x 768). With a 16:9 source, image will be
stretched vertical to fill the screen.
• In 16:9 mode, images are scaled to a 16:9 portion of the screen (1024 x 576), with a black letter-box added top
and bottom.
RED GREEN BLUE ALL
Full Screen
16:9 Mode