Marshall Electronics QVW-2710, Руководство по эксплуатации

Страница: 6 / 16

6
Monitor Front
Monitor Rear
27
Use this setting to choose the color of the IMD Fixed String text (see below). Available colors are red, green, and yellow.
This setting does not affect text color when using IMD text via the Image Video or TSL v4.0 protocols (text color is set via
the protocols).
■ IMD Alignment
Use this setting to choose the horizontal alignment of the IMD text. IMD text can be justified on the left, center or right of
the screen. This setting is overridden when using IMD text via the Image Video protocol (alignment is set via Image Video
protocol).
■ IMD String
Use this setting to display static IMD text on the screen. This setting is used to enter IMD text locally, when a serial
protocol is not used for remote control. The IMD Fixed String is saved after power cycle.
The IMD Fixed String will be
overridden by serial protocol commands.
IP Config Submenu
The IP CONFIGURATION submenu is intended to configure settings for access to the embedded Network Control
Platform on the QVW monitor series. Please consult with your network administrator to ensure compatibility with your
network.
■
DHCP Enable
Use DHCP to set the IP Address, Netmask and Gateway automatically.
■
IP Address
Use this field to manually set an IP Address for a particular monitor. If you enable DHCP, this will be automatically set
for you based on your current Network settings.
■
Netmask
IMD Fixed Configuration Submenu