Power Button with Indicator
Press power switch to turn on the Unit. The indicator LED will turn Green. Press again to put the
OR-841-HDSDI into standby mode. The LED will turn Red.
Tri-Color Tally Light
30mm Tri-Color tally lamp controlled via the Remote connector on the rear of the unit.
User-Definable Function Keys
Nine user-definable function buttons can be used for direct access to various settings.
Functions are assigned using the on-screen menu.
User-Defined Rotary Encoder
The Rotary Encoder may be assigned to one of five functions through the User Assign menu.
The available functions are:
• Volume
• Brightness
• Contrast
• Saturation
• Sharpness
Turning the encoder will allow the user to make adjustments to the selected mode.
ROTOMENU Control
Press the ROTOMENU Encoder to access the on-screen Menu. Turn the encoder to the Left or Right to
navigate Up and Down on the on-screen menu. Press the encoder to select the sub-menu. When you arrive
at the sub-menu or value you wish to modify, turn the encoder to select the new value and then press the
Encoder to save the change. If you exit the data entry submenu before pressing the Encoder, the changes
will not be saved. You may exit sub-menus by turning the Encoder to the Return heading and pressing the
Encoder to select, or simply by pressing the F9 key.
Headphone Jack
3.5mm stereo headphone jack. Left and Right source are selected from the on-screen menu.
1
2
3
4
Front Panel Features
6
5
3
5
2
4
1