background image

WARRANTY 

 

Mars’ warranty coverage, period, extent,  and 

limitations apply to the product only. It does not apply 

to labor. Mars warrants that the Mars product 1) is 

free from defects in materials and workmanship, and 

2)  conforms to Mars’ published specifications.  The 

warranty period for Mars products (except for heated 

models, custom models, or WMI,  WMH  and BD 

models) is a five (5) year period commencing on the 

date of shipment. The warranty for heated models is 

an eighteen (18) month period, the warranty for 

custom models and for accessories is a twelve (12) 

month period, and the warranty for WMI, WMH, and 

BD models is a twelve (12) month period. The date 

on  the  customer’s invoice is the date of shipment 

unless Mars or your reseller informs you and Mars 

otherwise. Mars will provide free replacement of any 

part that fails as a result of a defect in material or 

manufacturer’s workmanship. 

Changes in 

operational specification parameters that differ from 

those provided on the original purchase order are not 

covered.  Mars products  are  inspected and tested 

before packaging and are  shipped in working 

condition.  The warranty for Mars products  only 

covers free-of-charge replacement of failed parts. 

The warranty does not cover labor and transportation 

expenses that may be required to deliver  and to 

install replacement parts.  Because in many 

instances it is impossible to determine the cause of 

failure,  the  customer may be responsible for 

transportation charges associated with replacement 

of failed part. Mars does not warrant uninterrupted or 

error-free operation of Mars product.  Under no 

circumstance is Mars liable for any of the following: 

1)  third-party claims against you for damages,  2) 

special, incidental, or indirect damages,  or  3)  any 

economic consequential damages (including lost 

profits and savings), regardless of whether Mars, its 

suppliers, or its resellers  were  informed of the 

possibility of damages. The warranty does not cover 

repair or exchange of Mars products resulting from 

misuse, accidental damage, modification, unsuitable 

physical or operating environment, improper 

maintenance  or  installation by customer, or failure 

caused by a product for which Mars is not 

responsible. The warranty does not cover damages 

caused by mishandling during transportation.  The 

warranty is voided by removal or alteration of Mars 

product or parts identification labels, and by improper 

installation of product and resulting non-compliance 

with federal, state, and local codes and regulations. 

Additionally, Mars reserves the right to void the 

warranty for non-payment of invoice. 

 

CONTACT FACTORY FOR COMPLETE PARTS 

LIST FOR ALL MODELS. 

 

KEEP THIS MANUAL FOR YOUR RECORDS. 

Model Number: ______________________________ 
Serial Number: ______________________________ 
Date Purchased:  ____________________________ 
Dealer Purchased From: ______________________ 
 
 
 

 

14716 S. Broadway St., Gardena, CA 90248 

(310) 532–

1555 ● 

(800) 421-1266 

Fax: (310) 324-3030 

Please go to our website at 

www.marsair.com for a 

downloadable version of this document. 

Содержание PH12 Series































Отзывы: