THE MAIN SCREEN – Continued
ICON Specifications
1. H
= High Temperature Range.
2. R
= Ready Mode. = Rest Mode.
3. F1
= Filter Cycle 1 is running. = Filter Cycle 2 is running. = Filter Cycles 1 and 2 are
both running.
4. O3
= Ozone is Running. If you don’t see the icon that means the Ozone is OFF.
5. C
= Cleanup Cycle is Running.
6.
= Wi-Fi icon just indicates that the Wi-Fi link is connected. It does not indicate signal
strength.
7.
= Invert (or flip) Screen.
8.
= Lights is turned ON. = Light is Inactive. = Light is Disabled.
9.
= Music is Active. = Music is Inactive. = Music is Disabled.
10. Message Waiting Indicator: The Message Waiting Indicator will show one of the following
icons:
= Fatal error (Spa can’t function until it’s fixed)
= Normal Error or Warning
= Reminder Message
= Information Message.
Touch the Indicator to go to a Message Screen which shows the message.
Some messages will include the “Call for Service” text as it requires a service technician to fix
the problem.
Touching the Error/Warning/Reminder/Info Icon on the Message Screen will take you to the
System Information Screen to allow for troubleshooting over the phone or for a field service
tech to better understand what is going on. Exiting the System Information Screen will take
you back to the Message Screen in that situation.
11. = Adjust set temperature higher.
12.
= Spa Equipment Control Icon. Brings up a new screen where the spa jets, and other
equipment can be controlled.
While on the Spa Equipment Screen, you can press a Jets button once for low speed, and
if configured press it again for high speed.
= Jet is Inactive. Indicates if a pump is running or not.
13. Indicates if the temperature is in
°F
= Fahrenheit or
°C
= Celsius.
14. Current water temperature if
°F
or
°C
is solid; set temperature if
°F
or
°C
is flashing.
15. Setting Icon. = Settings is Active.
16.
Different animation sequences, including blinking, may indicate different stages of
heating.
17.
= Adjust set temperature lower.
^
^
2
