THE UTILITIES SCREEN
Utilities
The Utilities Icon on the Settings Screen takes you to the
Utilities Screen.
The Utilities Screen contains the following:
Panel
Touching the Panel Icon on the Utilities Screen takes
you to the Panel Screen, where you can set how long it
takes the panel to go to sleep after the last activity. The
Sleep Timer can be set from 1 minute to 60 minutes. The
default is 30 minutes.
Fault Log
The Fault Log is a record of the last 24 faults that can be
reviewed by a service tech.
Use the Up and Down buttons to view each of the Faults.
When Priming Mode shows in the Fault Log, it is not a
fault. Rather, it is used to keep track of spa restarts.
GFCI Test
(Feature not available on CE rated systems.)
Your system may have GFCI configured in one of three ways:
1. GFCI test is not enabled
2. Manual GFCI test is enabled but automatic GFCI test is not enabled
3. Both manual and automatic GFCI tests are enabled. The automatic test will happen within
7 days of the spa being installed and if successful will not repeat. (If the automatic test fails
it will repeat after the spa is restarted.)
GFCI Test will not appear on the screen if it is not enabled. This screen allows the GFCI to be
tested manually from the panel and can be used to reset the automatic test feature.
Units Screen
•
The Units Icon on the Settings Screen takes you to
the Units Screen.
•
Press Temp Display to change the temperature be-
tween Fahrenheit and Celsius.
•
Press Time Display to change the clock between 12
hr and 24 hr display.
Reminders
The Reminder Icon on the Settings Screen takes you to
the Reminders Screen.
Press Reminders to turn the reminder messages (like
Clean Filter) ON (Yes) or OFF (No).
12
