TIME-OF-DAY
Be sure to set the Time-of-Day
•
Setting the Time-of-Day is important for determining filtration
times and other background features.
•
Settings Screen takes you to a screen where you control the
Time-of-Day.
•
On the Time-of-Day screen, simply select the Hours and
Minutes. Use the Up and Down Buttons to make changes, then
Save.
•
If no Time-of-Day is set in the memory an Information Screen will appear. If you exit it an
Information Icon will appear at the bottom of the Main Screen, until the Time-of-Day has
been set.
Note:
If power is interrupted to the system, Time-of-Day will be maintained for several days.
ADJUSTING FILTRATION
Main Filtration
Using the same adjustment as Setting the Time, Filter Cycles are
set using a start time and a duration. Each setting can be adjusted
in 15-minute increments. The panel calculates the end time and
displays it automatically.
The Filter Icon on the Settings Screen takes you to a screen where
you control the Filter Cycles.
Filter Cycle 2
Viewing Filter 1 while Filter 2 is OFF:
Viewing Filter 1 while Filter 2 is ON:
•
Press “1” to view Filter 1. Press “2” once to view Filter 2. Press “2” again to turn Filter 2 ON
or OFF.
•
When Filter Cycle 2 is ON, it can be adjusted in the same manner as Filter Cycle 1.
•
It is possible to overlap Filter Cycle 1 and Filter Cycle 2, which will shorten overall filtration by
the overlap amount.
10
