Marquant 014331, Руководство по эксплуатации

Страница: 51 / 55

EN
51
date is shown when the settings mode
is deactivated.
CONNECTION OF WIRELESS
OUTDOOR SENSOR
• 1 multifunctional wireless remote sensor
and up to 3 channels from the wireless
remote sensor for temperature/humidity
can be connected to the weather station.
• For 3 minutes after starting the weather
station searches automatically for wireless
sensors and registers them. Each sensor
generates a random ID after starting, so
that the sensors are distinguished from
each other.
• When the main display image is shown,
tap the "G" button to switch between
showing the different channels of the
wireless sensor.
NOTE:
The IDs for wireless sensors can be shown in
display mode.
• Data for temperature/humidity on a
channel on the wireless sensor must be
shown on the clock display. When the
channel has been selected in display
mode, press the button to close display
mode.
NOTE:
• The selected channels are shown in the
places for the values for temperature
and humidity from the remote sensor for
temperature/humidity when display
mode is closed. The channel number is
shown at the same time by the channel
icon (figure 1, pos. 15). The values shown
can be OUTDOOR (multifunctional
wireless remote sensor) or CH1, CH2 or
CH3 (one of the 3 channels on the
wireless remote sensor for temperature/
humidity).
• If the weather station does not detect a
signal from a sensor, or if the sensor is
Hour
History for the last hour shows the cumulative
value for the last 60-minute period.
24 hours
24 History for 24 hours shows the cumulative
value for the last 24-hour period.
Day
History for day shows the cumulative value for
the last day (from 0:00 to 23:59).
7 days
History for 7 days shows the cumulative value
for the 7-day period before the last registration.
Month
History for the month is for the calendar
months, for example 1 January to 31 January.
Year
History for the year is for the calendar months,
for example 1 January to 31 December.
Total
Total history shows the value for the total run
time since the product was started.
Clearing of history
When showing the history for precipitation,
press the "F" button for 3 seconds to clear all
the history for precipitation.
NOTE:
• The value for precipitation resets to 0
mm (inches).
• The display mode closes after 20
seconds if no buttons are pressed, or
when the "A" button is pressed. The
weather station resumes its clock display
and the last shown precipitation data. If
precipitation data is shown before
settings mode is activated, the same