M3 & M5 Systems | V7 | Introduction and Presentation
Equipment List
Below are the hardware and software required to install a M3 system. Box 1 and 2 contain the
minimum hardware needed to install the system.
Box 1: Receiver (M3REC/M5REC)
• 1 receiver
• 2 Mx hydrophone junction boxes (ref. 46-055-01)
• 1 CAT5e network cable
• 1 Ethernet connector kit
• 1 Mx hardware kit (mounting screws and ground strap)
Box 2: Computer (PC-0-03)
• 1 Mac mini i5 computer (2.6 GHz)
• 1 wireless trackball mouse
• 1 Mac mini power cord
• 2 Thunderbolt to HDMI/VGA/DVI adapters
• 1 USB Ethernet adapter
• 1 USB serial adapter
• 1 Ethernet cable for PoE adapter
• PoE adapter (ref. 25-766-01)
• 1 Mac mini mount (ref. 25-786-01)
• 1 hardware kit (mounting screws for Mac mini mount)
• 1 Scala/Scala2 software dongle
Optional equipment (not included)
• 1 to 2 monitors
• 1 Uninterruptible Power Supply (UPS) to prevent problems if the mains power fails
(recommended). Size: 500VA.
• Additional hydrophone junction boxes
• 1 test hydrophone that you can keep on board and connect to the receiver to do functional tests.
• 1 NMEA converter junction box (ref. NC-2-TEMP) to receive temperature data from
hydrophones
• 1 NMEA multiplexer to receive NMEA data and display them in Scala/Scala2: ShipModul
MiniPlex-3E-N2K if using NMEA2000 and NMEA0183 or Miniplex-3E if using only NMEA0183.
• If using Mosa2 on a tablet computer: refer to Marport sales offices to know the recommended
model.
|
11
