Marmony MTC-40, Руководство по эксплуатации

Страница: 20 / 24

20
HOLIDAY MODE
For the duration of a longer absence, e.g. a holiday, you have the
option of programming the thermostat accordingly. You can set a start
time (holiday start) and end time (holiday end) as well as the desired
room temperature for the holiday. While you are away, the thermostat
regulates the desired temperature and, after your holiday, it returns to
the selected “AUTO” or “MANU” programme.
Setting the holiday programme:
- The thermostat is in ON / OFF mode. Switch on the display lighting
(short press on any button).
- Use the “+/- buttons” to select the desired MANU mode (“MANU”) is
in the programme row and the suitcase symbol appears in the symbol
(row). Press the “SET / OK button” for 3 seconds and “MANU” starts
flashing. Press the “SET / OK” button. The “TARGET” temperature display
flashes.
- Use the “+/- button to select the desired “TARGET” room temperature
during your absence. Press the “SET / OK” button to confirm.
Note: If you only wish to set one, two, three, four or five switching on and off times,
once you have entered the final value you wish to enter, wait until the thermostat
switches back to the main menu (approx. 15 seconds) and the values you have
entered will be saved automatically.
The setting process for “AUTO P2” takes place in the same way as for “AUTO
P1”. In the “ON / OFF mode”, select Auto P2 and follow the instructions above.
- In the activated “AUTO mode”, you can change the desired “TARGET”
temperature manually at any time by pressing the “+ / - button”.
The change remains active until the next programmed temperature change
to “AUTO mode” becomes active.
Note: For times for which you have not created a target (U1-U6), the thermostat
switches to the 19 °C factory setting.