Marmony MTC-40, Руководство по эксплуатации

Страница: 17 / 24

17
MENU SELECTION
OPERATION WITH A THERMOSTAT & MANUAL MODE
Operation with thermostats (radio operation) and manual mode
(MANU).
Once you have set the date and time, the thermostat is ready for
operation. In manual mode, you can preselect a desired “TARGET”
temperature and this temperature is then automatically kept constant
by the thermostat. The temperature can be set from +5 °C to +39 °C.
Setting the “MANU” manual mode:
- The thermostat is in ON / OFF mode
- Switch on the display lighting (short press on any button).
Use the “+ / - button” to switch to manual mode (you can find “MANU”
in the lower part of the programme row) and press the START button
(MANU is flashing now).
Note: Attention: do not select MANU with a suitcase in the symbol bar (holiday
mode).
Now use the “+ or -” button to set the desired TARGET temperature. The
thermostat now sends commands to the receiver. The “flame symbol”
is illuminated in the symbol row when heating mode is switched on. The
receiver switches your marmony infrared heater on. The LED on the
receiver is illuminated in green (heating mode).
- To exit the “MANU” manual mode, press the “ON /OFF” button and the
thermostat switches to “OFF” mode (heater switched off).
Note: A connection is established between the thermostat and the receiver approx.
every 15-30 seconds depending on the mode to save battery. Delayed switching of
the receiver is therefore normal.