Marmony MTC-40, Руководство по эксплуатации

Страница: 13 / 24

13
After inserting the batteries, the thermostat is in OFF mode.
- Switch on the display lighting (short press on any button).
- Press the SET / OK button for 3 seconds.
The year (
Y) starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The month (
M) starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The day (
D) starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The hour starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The minute starts to flash. Use the “+” or “-” button to adjust the
value. Press the “SET / OK button” to confirm and 1.0 °C flashes in the
programme row and CONST. is illuminated. The date and time setting
process is now complete! Additional entries for the CONSTANTS are not
necessary! Now wait 15 seconds until the display lighting switches off.
The data is saved automatically and the previous menu is displayed!
Additional entries for the CONTANTS are already optimised as
factoring settings for your marmony infrared heating systems
and should not be changed!
After the date and time have been entered, the CONSTANTS are
displayed and “CONST.” is illuminated in the programme bar. Change
hysteresis: On the display at the top left, the pre-set hysteresis value of
1.0 °C flashes. This pre-set value should not be changed. Confirm value
by pressing the “SET / OK button”.
Note: When the “TARGET” temperature is reached, the thermostat switches the
heater off and switches it back on again when the room temperature falls below
the set hysteresis value (error variable). The hysteresis value can be changed with
plus / minus from 1 °C to 5 °C.
Example: If the TARGET temperature is 20 °C and the hysteresis is 1 °C, the
thermostat switches the heater off at 20 °C and switches it back on again in the
event of a temperature drop to 19 °C. Recommended setting for marmony infrared
heaters: “1.0 °C”
SETTINGS
DATE, TIME, CONSTANTS