Page 2 of 7
45DS Electrical Stage
Course Computer Wiring (2-14-08)
1. Course computer unit was mounted on panel that behind the bunk rest.
2. Install the computer the power supply, gain the 12V power from DC junction box, find autopilot terminal
stud that comes on the junction panel.
3. Install power supply ground and the other end of the cable should be secured on the ground bus that lo-
cates inside the V berth hanging locker.
4. Install electric compass unit inside the main cabin fwd bunk inboard aft corner, keep the unit away from
other electric device as possible. The other end of the fluxgate wire connects to the terminal on course
computer.
Get power supply from autopilot
breaker
Inside the main cabin fwd bunk in-
board aft corner.
Power supply cables routed from
computer to DC junction box
Shows wires and cable were installed on S# course computer
