Page 6 of 7
Sea– Talk Loop:
1. Install speed, depth and wind transducer wires on ST-60 displays.
2. Connect sea-talk cable that has been ran from electrical panel to autopilot controller.
3. Use sea-talk cable to bridge controller and knot display.
4. Use sea-talk cable to bridge knot & depth display
5. Use sea-talk cable to bridge Wind & depth display.
45DS Electrical Stage Autopilot
Pedestal Display Installation (ST-60 & E120)
Sea talk 2 from wind
transducer
Sea talk 2 from
depth transducer
From elec-
tric compass
From rudder
reference
to AP con-
troller
Sea Talk 2
from Speed
Transducer
From sea
talk system
Autopilot drive unit under starboard side steering drive
Autopilot rudder reference locates next to rudder quadrant
