20
ON
O F F
3X
5X + 1X (Hold)
With the ignition switch in the OFF position, Turn the
ignition switch On - Off - On - Off - On - Off
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note:
Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
Step 4
Exit Programming
Alarm Feature Programming (Group 2)
(continued)
Alarm Feature Programming (Group 3)
Step 1
Step 2
Before 15 seconds has passed, push and release the
valet switch 6 times holding the button down on the
6th press. Wait until 3 short chirp/beeps + 1 long
chirp/beep is heard. Release the button. You are now in
“Alarm Feature Programming (Group 3)” mode.
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulses
LED Three Pulses
LED Four Pulses
(Factory Default Setting)
Step 3
Use the transmitter buttons as illustrated to adjust the features required. Keep repressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirps/beeps is heard. Move on to the
next feature.
HC2
Brown Wire
5 Sec On - 5 Sec Off
Pulsing (+) Siren Output
HC2
Brown Wire
Constant (+) Siren Output
HC2
Brown Wire
Car Horn Type (+) Output
+
HC6
Violet/Black Wire
(-) Channel 4 Output
1 Pulse Output
HC6
Violet/Black Wire
(-) Channel 4 Output
Latched Output and Reset
with Ignition "ON"
HC6
Violet/Black Wire
(-) Channel 4 Output
Output as Long as TRX
Button is Held Down
HC6
Violet/Black Wire
(-) Channel 4 Output
Output for 15 Seconds
HC6
White Wire = 2-Step
Door Unlock Output
HC6
White Wire =
Factory Security Disarm
Signal Output
HC6
White Wire =
Dome Light Output
HC6
White Wire =
Ground Output
During Start (Crank)
HC8
White/Blue Wire =
1 Pulse Activate
HC8
White/Blue Wire =
2 Pulse Activate
HC8
White/Blue Wire =
3 Pulse Activate
HC6
Light Brown Wire =
Horn Output
HC6
Light Brown Wire =
Factory Security Rearm
Signal Output
HC6
Light Brown Wire =
Start Status (Shock Sensor
Bypass Control) Output
