marklin baureihe V 60, Руководство пользователя

Страница: 20 / 43

2
21
Operation
2.5 Adjusting the Sound
Effects Circuit
The front hood on the locomotive
must be removed for the following
adjustment work (=> Page 40). The
upper circuit board of the two circuit
boards is the sound effects electronic
circuit on which you can carry out the
following adjustments.
2.5.1 Adjusting Volume
Important: This potentiometer is
located on the upper sound
effects electronic circuit board.
Under no circumstances should
you confuse this potentiometer
with one of the potentiometers on
the lower digital circuit board for
adjusting the running characte-
ristics of the locomotive.
Turning the potentiometer to the left:
louder
Turning the potentiometer to the
right: softer
This potentiometer has a stop at the
two end points. Never try to turn the
potentiometer with force past these
stops.
2.5.2 Coding Switches on the
Sound Effects Electronic
Circuit
The sound effects electronic circuit is
set up for each model with the 8
coding switches. The appropriate
settings for your model were made at
the factory. No changes in these
settings are therefore necessary.
Important: These coding switches
are located on the upper electronic
circuit for sound effects. Under no
circumstances should you confuse
them with the 10 coding switches
for setting the address and the
mode of operation on the lower
digital electronic circuit.
The 8 coding switches are set at the
factory as follows:
Switch 1 2 3 4 5 6 7 8
Setting On On On Off On On On On