3
3. Mounting systems
Attention!:
Basically the following is applicable for all mounting systems:
1. The mounting material manufacturers (e.g. Fischer, Hilti, Upat, etc.) offer different mounting systems
according to the undersurface. If the conditions for the mounting are met according to DIN EN 13561,
the wind resistance class 2 or 3 for the mounting can be confirmed to the user (see sales information
"dimensions and features").
2. Mounting material is not supplied automatically, as different subsurfaces (e.g. concrete, lime sand
stone, autoclaved aerated concrete etc) require different types of mounting material.
3. IMPORTANT: Mounting brackets have to be aligned with each other! When subsurfaces are uneven, the
clearances are to be checked using a cord pulley and if required compensated accordingly.
3.1 Niche mount
with motor drive
Measurements
in mm
with manual drive
Measurements
in mm
1. Determine mounting height. Mark the position
of the brackets on the mounting surface (see
„mounting area of the brackets“).
2. Mark drillings on axial dimensions and drill
(screws M 6).
3. Fix bracket. Depending on the size of the verti-
cal awning, fix additional brackets between the
outer brackets brackets concentrically and/or in
regular spacings.
Attention!: Measure all brackets diagonally!
