Página nº
22
de
25
12.- Appendix I: Filter-holder identification.
As explained in section 5.3.3, the grinder has several filter-holder
identification systems, which can be set by your Service Technicians. The most
useful among them is the Filter-holder Detection system. Using this patented
system the grinder distinguishes between a filter-holder for two cups of coffee
and filter-holders for one cup, without any action on the part of the operator.
A special tag or identifier (provided with the grinder) must be fixed to the
2-cup filter-holder: the grinder senses the presence of this device (and
provides the dose for two cups of coffee) and filter-holder without tag (for
which it provides the dose for one cups of coffee), with no need for any action
on the part of the operator.
To install the identifier proceed as follows:
1.- Two magnetic tags are supplied with each A-
class grinder, to be fixed to the 2 cups filter-
holder.
2.- Place the tag as shown in the image below, the side at an angle facing
towards the grinder. (See detailed
installation instructions, supplied with
the tags).