Página nº
17
de
25
8.- Cleaning.
Before proceeding to clean any grinder parts, disconnect from the power
supply by unplugging the electrical cord from the back of the grinder.
8.1.- Cleaning the bean hopper
Close the inlet hopper and loosen the screw (T) that attaches the hopper
to the grinder (See the illustration). Pull and turn the Hopper fixing device (Pos.
4) until the position sown above (continuous line horizontal). Remove the
hopper from the grinder and empty any remaining coffee.
Clean the hopper with soap and a cloth soaked in water to remove the
residual oils from the coffee beans and dry it carefully.
To put the hopper back in place, pull the fixing device (4) and turn it 90º to
the usual position (continuous line horizontal). Put the hopper in the grinder
and push it down until the fixing device fits in the hole (R) of the hopper neck
(see image at paragraph 5.2).
