INDUSTRIAL PRINTER QUICK START GUIDE
4
USER NOTES
MATERIAL NOMENCLATURE
In this guide, “Onyx” refers to Onyx and Onyx FR; “Nylon” refers to Tough Nylon and Nylon White.
TABLETOP USE ONLY
Markforged Industrial Series printers are approved for tabletop use only. Set up your printer on a sturdy level
surface with sufficient access on all sides. The printer is not approved for free-standing floor use.
POWER DISCONNECT ACCESS
Take care to set up your Industrial Series printer so that the disconnecting device (power switch on the rear face
of the printer) is accessible at all times. Note that the power cord can be disconnected as a backup if the power
switch becomes inoperable or inaccessible.
CLEANING/DECONTAMINATION
The camera and print chamber can only be wiped down using a damp microfiber cloth. The clear shield can be
cleaned with a microfiber cloth and non-abrasive window cleaner, as other cleaning agents could permanently
fog or scratch the surface. Please follow instructions below (
Reducing Burn Risks
) when cleaning your printer.
REDUCING BURN RISKS
●
Do not touch the nozzles or print head when hot, unless explicitly instructed to do so by Markforged
documentation or personnel
●
During a print run, leave all doors closed
ALWAYS FOLLOW SAFETY INSTRUCTIONS
Failing to use your Industrial Series printer in the manner specified by the manufacturer may lead to unsafe
operating conditions. Follow all safety instructions posted on the unit and in the written documentation.
Note: Consult the included
Safety Sheet
for an explanation of the safety icons used in this manual.
NOTE ON FIBER CAPABILITY
This
Quick Start Guide
covers all models of Markforged Industrial Series printers. If your printer model is not
fiber-capable, some of the sections in this
Quick Start Guide
may not apply. Such sections will be marked with
the icon to the left.
