Markem Imaje 9020, Руководство пользователя

Страница: 87 / 182

Troubleshooting
A36163-B
87/182
A / D
No.
Description Context
Consequences
Check / Cause / Remedy / Solution
21
A Duplicate print
not authorized Three conditions are required
for this fault to appear:
-
the serial link is used.
-
the “Print-out no double
up” option must be
selected.
-
two consecutive
attempts must be made
to print the same
message.
Consequences: The
message is printed only
once.
Check timing of sending of messages and Dtop.
22
D CRC(RAM)
message
memory lost
The CRC calculated when
the printer is switched on is
different from the CRC
stored.
Consequences:
The messages in the library
are lost.
1- Reprogram the messages.
2- Check the position of the battery jumper on the
CPU.
3- Check the voltage of the CPU battery.
4- Replace the CPU.
25
D FPGA
impossible to
program When printer switched on.
Consequences:
The printer
cannot print.
Replace the CPU.
26
D CRC message
library incorrect The CRC calculated when
the printer is switched on is
different than the CRC
stored.
Consequences:
The messages in the library
are lost.
1- Reprogram the messages.
2- Check the position of the battery jumper on the
CPU.
3- Check the voltage of the CPU battery.
4- Replace the CPU
27
A Timeout speed
measurement
(20sec) If the object traveling speed
is measured by 2 cells
(without a tachometer), the
pulse from the second cell
(TOP 1) was not received by
the printer. (time > 20s)
Consequences: The
message is not printed.
1- Check the cell connections and their operation.
2- Check the distance between the cells.
3- Check the conveyor speed.
28
D No signal for
speed
measurement If the object traveling speed
is measured by 2 cells
(without a tachometer), the
pulse from the first cell
(TOP 2) was not received by
the printer.
Consequences: The
message is not printed.
1- Check the cell connections and their operation.
2- Check the distance between the cells.
3- Check the conveyor speed.