8
9
WARNING
2.1 Technical data
• Tested to EN 795: 2012 Class A1 and TS 16415: 2013
• Stainless steel, colour: stainless steel
• Weight (without screws): 144 g
• Width: 50 mm
• Length: 90 mm
• Height: 14 mm
• Hole/screw spacing: 38 mm
• Number of users: 1 person
2 people (depending on base and installation position,
see Table 4.1)
2.2 Labelling
• We recommend that you give your product an inventory number and enter it in the
inspection sheet.
• Do not remove any stickers or labels from your product!
2 PRODUCT DESCRIPTION
Designation
EN test number
Year of manufacture
CE
Number of users
Read instruction manual
2.3 Scope of delivery
(see Figure 1)
1x MARK Gekko (base plate, housing, buckle)
2x screws/bolts (incl. nuts)
1x box
1x instruction manual incl. installation report and inspection report
2.4 Accessories
Must not be combined with non-tested or non-approved accessories.
• Only use this product in conjunction with tested accessories or those recommended
by MARK Save A Life that meet the applicable technical standards for PPE and the
requirements of the Austrian PPE Safety Regulation.
Classed as tested accessories:
Descender and rescue devices
Lifting devices
Retractable fall arrest blocks
Guided-type fall arresters on fixed anchor lines
Guided-type fall arresters on flexible anchor lines
Rescue overalls
Energy absorbers
Carabiners
Anchor points
Safety harnesses
Connectors
The accessories listed above can also be viewed at www.savealife.at. You can give us a
ring or send us an email too, we’d be delighted to advise you!
EN 341
EN 1496
EN 360
EN 353-1
EN 353-2
EN 1497
EN 355
EN 362
EN 795
EN 361
EN 354
2.5 Redundancy
Training is not an emergency situation. Generally speaking, a second safety device
should be employed for all exercises (redundancy). Unforeseeable events, technical
failure and human error can never be completely excluded! A second MARK Gekko can
fulfil the necessary redundancy function, for example.
2.6 Rescue operations
The anchor point must undergo a visual and functional inspection after each rescue
operation; only MARK Save A Life or a competent person may perform this inspection.
2.7 Overload
If anchor points have been subjected to stress from a fall or an overload, withdraw them
from future service.
2.8 Temperature range
This product can be used in a temperature range of -40 °C to +150 °C.