Mark-10 TSTM-DC, Руководство пользователя

Страница: 15 / 26

Series TSTM-DC Test Stands User’s Guide
15
4.12 Default settings
Revert to factory settings, as follows:
CW SPEED: 10 RPM
CCW SPEED: 10 RPM
AUTO RETURN: off
CYCLING: 00000 (off)
CW LM: 1.00 revolution
CCW LM: -1.00 revolution
OVERLOAD V: +/- 1
CW OVERLOAD: 100%
CCW OVERLOAD: 100%
CONTROL: CONSOLE
BAUD RATE: 19200
STOP BITS & PARITY: 8-1n
UNIT: RPM
KEYS: maintained
PASSWORD: 0000 (off)
Label Description
+ or – Cycles through “yes” or “no” selections
ENTR Returns to the Test Function Setup menu
ESC Exits the function without saving changes
4.13 Password (NEW PWORD)
If desired, a password can be set to prevent unwanted changes to test functions. The password can be
set to any number between 0000 and 9999. The default setting of 0000 indicates that the password is
disabled, and that the user can freely enter the Test Function Setup menu.
Default setting: 0000 (off)
Available settings: 0000 – 9999
Label Description
+ or – Increases or decreases the value.
ENTR Returns to the Test Function Setup menu
ESC Exits the function without saving changes
If the password is misplaced or forgotten, an
activation code
is required. While in Operating
Mode, press and hold STOP , then press menu simultaneously, and release both buttons. Scroll
to the right until “DISABLE PASSWORD” is displayed. Press ENTR to generate a
request code
,
then provide it to Mark-10, who will supply a corresponding
activation code
. The process for
entering the
activation code
is as follows:
1. The first digit of the
request code
will be flashing. Press + to increment the digit.
Pressing + when the number 9 is displayed will cycle to 0.
D E F A U L T ? : N O
E S C − + E N T R
N E W P WO R D 0 0 0 0
E S C − + E N T R